ACDelco GM Original Equipment CF188 (23281440) Cabin Air Filter

Perfect!!! Fit like a glove

Easy product and fit my car perfect. Box was in great shape when arrived as well. No smell or marks on the filter when I took it out.

I have a 2014 Silverado High Country with less than 30,000 miles. Every now and then I'd catch a whiff of musty air when it was humid outside. I figured it'd be worth checking and replacing the cabin air filter. Doing so, I ended up finding out that at some point in the past, a mouse decided to try building a nest on top of my filter.Removing the original one was easy enough. Four T15 torx screws on the bottom glove box. Two on top and two on the bottom side. It should pop out with minimal effort. Once the glove box is out, there is a black honeycomb-like cover over the filter itself. There are two tabs at the top that you pop up and the cover comes off easily.***** THIS IS THE IMPORTANT PART *****Before you pull the filter out, find a thin piece of rigid cardboard that will hold its form. Cut out a chunk that is slightly longer and wider than the filter, and slide it UNDER the old filter. The reason being, when you pull out the old filter, any leaves or other debris on top of it will fall on the cardboard instead of in the blower fan like I had experienced. You can then vacuum out the debris from the top of the cardboard so it doesn't have a chance to fall down.Assuming you followed the above instructions, re-assembly was easy. Slide the new filter in with the air direction arrow facing downwards, replace the filter cover, re-install the glove box, and re-install the 4 T15 torx screws.If you didn't follow the instructions, you'll either need to reach your hand into the filter slot and remove the debris... (good luck).Or you'll have to remove the kick plate under the blower assembly (four 7mm hex screws), and remove the three T15 torx screws from the blower motor. You can pull the blower out, remove the debris, then work backwards to re-assemble. On a side note, one of the four 7mm hex screws on the kick plate is a major pain to remove. It is in the far right hand corner close to the firewall. Re-installation of said screw is even worse...

Fits perfectly for 2018 Chevy Silverado 1500.Installed in about 5 min, when you pull the old one out expect a leaf or two to end up on your truck floor.I also took a shop vac and let in pull and duct out of the install slot before I put in the new one.My truck only has 24k miles and you’d be surprised how dirty those filters get.Low cost, huge improvement!!

Fits perfect GM quality

No problems, air flows better now

It was priced very well and installation was very easy. Do yourself a favor and CHANGE your cabin air filter. I totally forgot and i couldnt believe how bad mines was! It has made a world of difference. Also FYI i place a car fresher on top of mines and it now circulates incense through out my truck.

Factory ac delco item. Fits like it’s supposed to.